I. Introduction to Zero-Position Self-Locking Devices
In the operation ofкранs and other similar equipment, there is a need to prevent any inadvertent movements of the control console due to vibrations and accidental collisions. To address this concern, zero-position self-locking devices are installed on the operating handles. These devices play a crucial role in ensuring the safety and proper operation of theкранby minimizing the risk of unintended actions that could lead to dangerous situations.
II. Zero-Position Self-Locking Device on the Vertical Handle
Structure and Operation Principle of the Vertical Handle Self-Locking Device The operating handle for theкранis composed of an upper hemisphere and a lower hemisphere. The zero-position self-locking mechanism is designed in such a way that only when the lower hemisphere is grasped and lifted can the handle be moved away from the zero position to initiate an operation. This design ensures that any accidental bumps or vibrations that might cause the handle to shift will not result in an unwanted operation as long as the lower hemisphere is not deliberately lifted.
When the handle is in the zero position, it is effectively locked in place. The self-locking action is achieved through a specific mechanical arrangement within the handle structure. For example, there might be a locking mechanism that engages when the handle is at zero position, preventing it from moving without the proper action of lifting the lower hemisphere. This locking mechanism could involve components such as latches or interlocking parts that work together to keep the handle stationary.
Once the lower hemisphere is grasped and the handle is lifted away from the zero position, the operator can then perform the desired operation, such as controlling the movement of the crane’s boom or the lifting of a load. After the handle has been moved away from the zero position, the operator can release the lower hemisphere and continue with the operation without having to maintain a grip on it. This allows for more convenient operation while still maintaining the necessary safety precautions.
Adjustment for Special Operation Requirements However, in some cases where reverse connection braking is frequently used for stopping the crane and the operator finds it inconvenient to follow the normal operation procedure with the self-locking device engaged, an adjustment can be made. The operator can lift the lower hemisphere of the handle and then rotate it in the clockwise direction. By doing so, the lower hemisphere can be fixed in the lifted position, effectively disabling the zero-position self-locking function.
This adjustment provides flexibility for operators who need to perform repeated reverse connection braking operations. For example, in certain construction or loading/unloading scenarios where quick and repeated stops are required, disabling the self-locking function in this way can make the operation process more efficient. But it should be noted that when this adjustment is made, the operator needs to be extra cautious as the protection provided by the self-locking device is no longer in effect, and any accidental movement of the handle could potentially lead to unexpected crane movements.
III. Zero-Position Self-Locking Device on the Horizontal Handle
Operation Principle of the Horizontal Handle Self-Locking Device Similar to the vertical handle, the horizontal handle also has a zero-position self-locking device. The operation method for this device is slightly different. When operating the horizontal handle, the operator needs to press down on the handle ball. This action causes the positioning component that is recessed in the notch when the handle is at the zero position to tilt up. Once the positioning component is tilted up, the handle can be rotated for operation.
The self-locking action on the horizontal handle is based on the interaction between the handle ball, the positioning component, and the notch. When the handle is in the zero position, the positioning component fits snugly into the notch, creating a locked state that prevents the handle from being rotated accidentally. The pressing down on the handle ball disrupts this locked state by causing the positioning component to move out of the notch, allowing for the handle to be manipulated for the desired operation.
Operation after Leaving the Zero Position After the handle has been moved away from the zero position, the positioning component has also left the notch. At this point, during the subsequent operation, the operator no longer needs to press the handle ball again. This is because once the handle has been unlocked from the zero position and the positioning component is no longer in the restricting notch, the handle can be freely rotated and operated without the need for the additional action of pressing the handle ball. This design simplifies the operation process and allows for smoother control of the crane’s movement when the handle is in a non-zero position.
В заключение, the zero-position self-locking devices on both the vertical and horizontal handles of the crane are essential safety features that help to prevent accidental operations due to equipment vibrations and collisions. While they provide a standard mode of operation to ensure safety, they also offer some flexibility for operators to adjust according to specific operation requirements. However, any adjustments that disable the self-locking function should be made with caution as they remove an important layer of protection against unexpected handle movements and subsequent crane operations. These devices contribute to the overall safety and efficient operation of cranes in various industrial and construction settings.
