Introduction Grounding is an essential aspect of crane safety, ensuring the protection of both personnel and equipment from electrical hazards. Proper grounding mitigates the risks of electric shock, fire, and equipment damage by providing a reliable path for electrical currents to flow safely into the earth. This guide provides a comprehensive overview of grounding requirements […]
18
12月
12月
Introduction Beam cranes are one of the most widely used types of lifting equipment in industrial and construction environments. They are characterized by their ability to move loads horizontally along a pair of rails or a single track. This guide provides an in-depth exploration of the types and structures of beam cranes, including their operational […]
17
12月
12月
Introduction Wire rope slings are an essential component in various lifting and rigging applications due to their durability, flexibility, and high load-bearing capacity. Proper handling and operation are critical to ensure safety and efficiency during lifting tasks. This guide aims to provide comprehensive insights into the essential precautions and best practices for using wire rope […]
16
12月
12月
私. Unified Signals for Operators and Signal Personnel Gantry crane operators and signal personnel must use standardized and unified signals to ensure effective communication and coordination. Operators should ascend or descend the control cabin using designated ladders. Before engaging the power supply, the controller must be turned to the neutral position. The cabin floor should […]
15
12月
12月
Fuel efficiency is a crucial consideration for operating automotive cranes. By optimizing engine performance and adopting best practices, fuel consumption can be significantly reduced. One effective strategy involves increasing the engine’s compression ratio to its standard value. For diesel engines, the typical compression ratio ranges between 16:1 そして 22:1. Raising the compression ratio enhances the […]
14
12月
12月
私. Reasonable Matching The tires at the front and rear, left and right of the machinery must be reasonably matched. The tires assembled on the same machinery should ensure the same brand, specification, structure, tread pattern, and load. Radial tires and bias-ply tires cannot be mixed; tires with different rim diameters, widths, or different cross-sectional […]
14
12月
12月
The lifting capacity of a tower crane refers to the weight that its hook can safely lift. This capacity includes the weight of the slings, lifting devices, and containers. The lifting capacity varies with the crane’s working radius. したがって, each crane is equipped with a unique lifting capacity chart corresponding to its operating radius, commonly […]
13
12月
12月
Installation and Acceptance Standards for Trolley Conductors I. Brackets Anti-corrosion TreatmentBrackets should be treated with anti-corrosion measures to prevent rust and deterioration over time. This is crucial as they are often exposed to various environmental conditions, such as moisture, dust, and chemicals. Corrosion can weaken the structural integrity of the brackets, potentially leading to instability […]
13
12月
12月
Proper lubrication and maintenance of the crane’s walking mechanism are critical for ensuring the equipment’s longevity, reliability, and safe operation. This document provides comprehensive guidance on the lubrication and care of the crane’s walking components, including the reduction gears, wheel bearings, and open gear systems. Initial Setup and Reduction Gear Lubrication When the walking mechanism […]
12
12月
12月
私. Importance of Moment Limiters in Crane Safety Lifting equipment is a type of machinery with relatively high risks at construction sites. Once an accident occurs, it often leads to severe consequences with multiple casualties. したがって, the safety issues of lifting equipment have always been emphasized by relevant departments. The moment limiter is one of […]