In the realm ofကရိန်းoperations, ensuring safety in various environmental conditions is of paramount importance. One crucial aspect is protecting theကရိန်းfrom the potentially damaging effects of wind, especially in areas prone to strong gusts. This is where the automatic windproof rail presser comes into play, providing a reliable solution to preventကရိန်းcreep and enhance overall operational safety.
The automatically acting windproof rail presser operates on a unique and effective principle. It makes use of the dead weight of theကရိန်းto exert force through an inclined plane. This ingenious mechanism is designed to press the anti-skid shoe, also commonly known as an iron shoe, onto the top of the rail. The anti-skid shoe is equipped with a friction liner, which significantly increases the frictional force between the shoe and the rail. By pressing the anti-skid shoe onto the rail, the windproof rail presser effectively prevents theကရိန်းfrom creeping away due to external forces such as wind.
When the power supply of the moving mechanism is turned off or there is an interruption in the external power supply, a series of events unfolds. The anti-skid shoe slowly falls onto the top of the rail. This is a crucial safety measure as it prepares theကရိန်းfor potential wind gusts. If theကရိန်းis then blown by the wind, after moving a short distance, the anti-skid shoe is pressed even more tightly onto the rail. This action anchors theကရိန်းfirmly in place, preventing it from being displaced by the wind. The anti-skid shoe acts as a reliable anchor, providing stability and security even in the face of strong winds.
ဥပမာအားဖြင့်, စိတ်ကူးပါ။ ကရိန်းoperating in an open area near the coast where strong sea breezes are common. Without the automatic windproof rail presser, အဆိုပါ ကရိန်းwould be at risk of being pushed or even toppled over by the wind. သို့သော်, with the rail presser in place, as soon as the power supply is interrupted, the anti-skid shoe descends onto the rail. If a gust of wind hits theကရိန်း, the shoe is pressed firmly against the rail, preventing any unwanted movement.
When theကရိန်းneeds to resume operation and run again, a specific sequence of actions must be followed. ပထမ, the crane is moved backward a short distance in advance. This step is necessary to relieve some of the pressure on the anti-skid shoe and prepare it for lifting. ပြီးတော့, the power supply of the hydraulic push rod is turned on. The hydraulic push rod is designed to lift the anti-skid shoe off the rail. Once the anti-skid shoe is lifted, the running mechanism of theကရိန်းcan be safely started. This carefully orchestrated process ensures a smooth transition from a stationary, windproof state to a mobile operating state.
သို့သော်, it is important to note that the windproof capacity of the automatic windproof rail presser is limited by the dead weight of the ကရိန်း. This means that it may not be suitable for tallကရိန်းs or those with a relatively light weight. Tall cranes are more susceptible to the effects of wind due to their increased height and larger surface area. The limited windproof capacity is a result of the fact that the force exerted by the dead weight of the crane through the inclined plane may not be sufficient to counteract extremely strong winds on taller cranes.
ဒီလိုအခြေအနေမျိုးမှာ, additional windproof measures may need to be considered. ဥပမာအားဖြင့်, taller ကရိန်းs may require the installation of more robust wind-resistant systems such as guy wires or specialized wind sensors that can trigger additional safety mechanisms when high winds are detected. These supplementary measures can help to enhance the overall stability and safety of tallကရိန်းs in windy conditions.
နိဂုံးချုပ်အားဖြင့်, the automatic windproof rail presser forကရိန်းs is a valuable safety device that operates on a unique principle of using the crane’s dead weight to press an anti-skid shoe onto the rail. This mechanism effectively prevents crane creep and provides anchorage in windy conditions. သို့သော်, its windproof capacity is limited by the crane’s dead weight, making it less suitable for tall cranes. Understanding the working principle and limitations of the automatic windproof rail presser is essential for crane operators and safety engineers to ensure the safe operation ofကရိန်းs in various environments.
