To adjust the rotational speed of an asynchronous motor, we can start with changing the following three parameters: the number of pole pairs of the stator winding, the slip ratio of the motor, and the frequency of the power supply. Changing the first parameter affects the synchronous speed. Changing the second parameter only enables speed […]
17
Jan
Jan
Introduction to Tower Crane Reducer Housings The reducer housing of a tower crane serves as a critical structural component, providing support and protection to the gears and mechanical parts inside. Manufactured primarily from cast iron, typically of grade HT150, these housings are designed to withstand significant mechanical stress during operation. However, due to prolonged usage, […]
16
Jan
Jan
I. Purchase (Rental) of Tower Cranes 1. Purchase of Tower Cranes When purchasing a tower crane, it must be bought from a professional manufacturer with a valid production license. The manufacturer should provide technical documents such as the whole-machine certificate, quality guarantee for high-strength connecting bolts, quality guarantee for hoisting wire ropes, quality guarantees for […]
16
Jan
Jan
When lifting heavy objects, the hook wire rope should remain vertical. It is not allowed to drag the lifted object diagonally. When lifting heavy objects, the center of gravity should be accurately located and the object should be firmly bound. If there are sharp corners, they should be padded with wooden blocks. Before the heavy […]
15
Jan
Jan
(1) The deviation of the position of the girder center line from the designed positioning axis shall not be greater than 5 mm. The alignment of the girder’s center line is crucial as it serves as the central axis for the entire crane structure. Even a minor deviation exceeding 5 mm can cause misalignment of […]
15
Jan
Jan
(1) The deviation of the actual centerline of the track from the actual centerline of the crane girder shall not be greater than 10 mm. Precise alignment of these centerlines is fundamental. In large industrial workshops where cranes operate continuously, any misalignment here can lead to uneven stress distribution on the crane structure during movement. […]
14
Jan
Jan
Precautions Before Installation 1. Preparation of Bearings Since bearings are treated with anti-rust measures and packaged, do not open the package until just before installation. Additionally, the anti-rust oil coated on the bearings has good lubricating properties. For general-purpose bearings or bearings filled with grease, they can be used directly without cleaning. However, for instrument […]
14
Jan
Jan
(1) It is suitable for continuous and single tasks. In industrial production lines, for example, when a particular operation needs to be carried out repeatedly without much variation, the spring balancer can provide consistent support. This kind of continuous work often occurs in packaging processes, where the same item is repeatedly lifted, moved, and placed. […]
13
Jan
Jan
The static load test shall be carried out according to the following procedures and requirements. Park the crane at the column. First, start the hoisting mechanism to conduct no-load lifting and lowering operations, and make the trolley run back and forth along the whole journey. This no-load trial operation shall be carried out no less […]
13
Jan
Jan
Hydraulic jacks serve as the intermediate medium in hydraulic transmission systems, playing the roles of transmitting and converting energy. At the same time, they also perform functions such as lubricating, preventing corrosion, cooling, and flushing among various components within the hydraulic system. The main performance requirements of hydraulic jacks are as follows: Appropriate Viscosity and […]