Wire rope slings are essential tools in various lifting operations, playing a crucial role in safely transporting heavy loads. Tuy nhiên, to ensure the safety and success of these operations, it is vital to follow specific precautions when using wire rope slings. One of the key aspects is understanding and adhering to the correct placement of hanging points based on the type of hoisting being performed.
In single-leg hoisting operations, the placement of the hanging point is of utmost importance. The hanging point must be vertically located directly above the center of gravity of the lifted object. This requirement is crucial for maintaining stability and balance during the lifting process.
The center of gravity of an object is the point where the weight of the object is evenly distributed in all directions. When performing single-leg hoisting, if the hanging point is not directly above the center of gravity, it can lead to an unbalanced load. This imbalance can have several negative consequences. Trước hết, it can cause the lifted object to tilt or swing. As the object is lifted off the ground, any deviation from the vertical alignment above the center of gravity will result in a force that causes the object to move in an unwanted direction. This not only poses a risk to the object being lifted but also to the surrounding environment and personnel. Ví dụ, if a heavy machine part is being lifted with a single-leg sling and the hanging point is slightly off-center from the center of gravity, as the part is raised, it will start to tilt towards the side where the center of gravity is not directly below the hanging point. This can cause the wire rope sling to become stressed unevenly, increasing the risk of the sling breaking or the load slipping out of the sling.
Thứ hai, an unbalanced load can lead to instability in the lifting equipment. The crane or hoist used for the lifting operation is designed to handle loads that are evenly distributed and balanced. When an unbalanced load is present, it can put additional stress on the lifting mechanism, potentially causing it to malfunction or fail. This can result in serious accidents and damage to property. Hơn thế nữa, the swinging and tilting of the load can also damage nearby objects or structures. If the lifted object is close to other equipment, buildings, or structures, the uncontrolled movement can cause collisions and damage. Ngoài ra, the swinging load poses a danger to workers in the vicinity. Workers who are close to the lifting operation need to be protected from the potential hazards of an unbalanced load.
To ensure that the hanging point is vertically located directly above the center of gravity for single-leg hoisting, careful planning and measurement are necessary. Before starting the lifting operation, the center of gravity of the object should be determined as accurately as possible. This can be done through various methods. One approach is to use mathematical calculations based on the object’s dimensions and weight distribution. By knowing the shape and weight of the object, it is possible to calculate the center of gravity. Another method is to physically test the object to find its balance point. This can be done by using simple tools such as a fulcrum and a lever to determine where the object balances. Once the center of gravity is determined, the hanging point should be positioned directly above it using precision equipment such as cranes with adjustable booms or hoists with accurate positioning mechanisms. The operator should take the time to ensure that the hanging point is precisely aligned with the center of gravity to minimize the risk of an unbalanced load.
For double-leg hoisting operations, the placement of the hanging points is equally important. The hanging points should be located on both sides of the cargo, and the hook must be above the center of gravity of the lifted object. This configuration is designed to distribute the load evenly between the two legs of the sling and maintain stability during the lifting process.
When the hanging points are located on both sides of the cargo, it helps to balance the weight of the object. This is because the two legs of the sling share the load, reducing the stress on each individual leg. If the hanging points are not properly positioned on both sides of the cargo, the crate may start to lean towards one side as it is lifted. This can cause stress on one leg of the sling to be greater than the other, potentially leading to the sling breaking or the crate falling. By ensuring that the hanging points are symmetrically located on both sides of the cargo and that the hook is above the center of gravity, the crate can be lifted smoothly and safely.
To achieve the correct placement of hanging points for double-leg hoisting, careful measurement and alignment are required. The distance between the hanging points should be adjusted based on the size and weight of the cargo to ensure even distribution of the load. This can be done by measuring the dimensions of the cargo and calculating the appropriate distance between the hanging points. Ngoài ra, the height of the hook should be adjusted so that it is directly above the center of gravity of the lifted object. This can be done by using cranes with adjustable booms or hoists with leveling mechanisms to ensure that the load is lifted evenly and without any tilting or imbalance.
During the lifting operation, the operator should continuously monitor the position of the hanging points and the load to ensure that everything remains stable. Any signs of imbalance or uneven loading should be addressed immediately by adjusting the position of the hanging points or the load. This may require temporarily lowering the load and repositioning the sling or adjusting the crane’s position.
In three-leg or four-leg hoisting operations, the placement of the hanging points is even more critical to ensure stability and safety. The hanging points must be evenly located on the plane around the cargo, and the hook should be directly above the center of gravity of the lifted object. This configuration is used for larger and heavier loads that require more stability and support during lifting.
By having multiple hanging points evenly distributed around the cargo, the load is distributed more evenly, reducing the stress on each individual leg of the sling and minimizing the risk of failure. Ví dụ, in a three-leg hoisting operation of a large steel beam, the hanging points should be located at equal distances around the beam. This ensures that the weight of the beam is evenly distributed among the three legs of the sling, preventing any one leg from being overloaded. Tương tự, in a four-leg hoisting operation of a large container, the hanging points should be positioned at the corners of the container to provide maximum stability and balance.
To ensure the correct placement of hanging points for three-leg or four-leg hoisting, careful planning and measurement are essential. The distance between the hanging points should be determined based on the size and shape of the cargo to ensure even distribution of the load. This may require advanced engineering calculations and the use of specialized lifting equipment with adjustable rigging systems. Ngoài ra, the height of the hook should be adjusted so that it is directly above the center of gravity of the lifted object. This can be achieved by using cranes with multiple booms or hoists with adjustable rigging systems to ensure that the load is lifted evenly and without any tilting or imbalance.
During the lifting operation, close monitoring of the load and the sling system is crucial. Any signs of uneven loading, stress on individual legs of the sling, or instability should be addressed immediately. This may require adjusting the position of the hanging points, redistributing the load, or even stopping the lifting operation and reevaluating the lifting plan.
Tóm lại, following the correct precautions for hoisting with wire rope slings is crucial for ensuring the safety and success of lifting operations. By understanding and adhering to the proper placement of hanging points based on the type of hoisting being performed, operators can minimize the risk of accidents and damage and ensure that loads are lifted safely and efficiently. Whether it is a single-leg, double-leg, or multiple-leg hoisting operation, careful planning, measurement, and monitoring are essential to ensure the stability and safety of the lifting process.
![12 Wheelers 20 Ton Knuckle Boom Crane](https://www.towcrane.com/wp-content/uploads/2024/06/12-Wheelers-20-Ton-Knuckle-Boom-Crane-150x150.jpg?v=1721266636 "Phải làm gì nếu cần cẩu gắn trên xe tải nhỏ \"không ổn định\"le"trong khi làm việcrk?")
